How To Remove Iron on Patches 2022

No Comments

8 Unique Ways How To Remove Iron on Patches

Are you worried about your favorite denim jacket or that pair of jeans gifted to you on your birthday? If you believe you are done with all the methods for how to remove iron on patches from your clothes, then stop thinking like that. I know iron patches are the best hacks to hide any torn part of our clothes. This hack seems helpful in certain ways. It also looks fancy when applied to jeans, t-shirt, or tops. But you can’t deny the fact that removing an iron-on patch is not an easy job.

But before you quit, let’s give a try to these six easy-to-do hacks of how to remove iron-on patches? You will not regret trying out these hacks. Figure out which of these methods works for you. Go save your outfits!

08 Best Methods to Use:

08 ways of how to remove iron-on patch glue from clothing:

  1. Try Nail Polish Remover
  2. Use your Iron
  3. Use Freezing Method with the Iron on Patch
  4. Use a Hair Dryer
  5. Give a Try to White Vinegar Soak
  6. Do it with a Warm Water Soak
  7. How to Remove Iron-On Patch Glue from Clothing?
  8. How to Remove Iron-On Patch Glue from Fabric?

1) How to Remove Iron on Patches Using Nail Polish Remover

The first method is to remove iron-on patches using nail polish remover. This method works out for almost every fabric. However, one thing to keep in mind is to test this method – be mindful before trying any new hack for your expensive clothes. If some practices might be good for others, it does not mean they will work for you too. So for testing, you need to apply a nail polish remover onto a cotton ball and dab it onto an invisible part of the fabric. If it does not leave any stains or does not damage the fabric, it means you are ready to go!

How to Use:

  • First, take a cotton ball and soak it into the bottle of nail polish remover. After soaking, dab the cotton ball gently around the edge of the patch.
  • While dabbing the spot, try to lift the patch as you go.
  • If needed, soak another cotton ball and continue dabbing and swiping the patch until removed.
  • Lastly, use nail polish remover to remove the residue glue from your cloth.

2) How to Remove Iron on Patches Using Your Clothes Iron

High heat temperatures always work out best for removing any sticky substances or glue that adhere to the fabric. So let’s try this one too!

How to Use:

  • Find out your iron and turn it on a medium-hot setting. Now take out a small piece of cotton fabric and bring it to the iron table.
  • Place the cotton fabric on the iron stand, and then put your shirt, jeans, denim, anything that has an iron-on patch to adhere to it.
  • The game is to place the glue side of your shirt down on top of the cotton fabric.
  • Now simply hold the iron on the patch for about twenty seconds so that the glue will ultimately move to the cotton fabric.
  • Repeat the process a few more times to vanish the iron-on patch from your clothes.
  • Peel the fabric to remove the rest of the glue from the iron-on patch.

3) How to Remove Iron on Patches Using the Freezing Method

 Have you ever tried freezing the item with the iron-on patch? Yeah, it sounds a little weird. I felt that too, but once you try, you would get into the pain to try other methods because this is super-fast and easy. Try it today and thank me later.

How to Remove Iron on Patches Using the Freezing Method

How to Use:

  • First of all, put the item with the iron-on patch and zip it into a plastic bag.
  • Put it into the freezer for some hours until the glue seems to loosen.
  • Note down: Don’t rush to the freezer to check it after every 10 minutes. You can watch Netflix or bake pancakes in the meantime.
  • Now, if you are done watching your movie, it’s time to remove the glue from the fabric. Remove the plastic bag and place your item on a square slab. Use a spoon or butter knife to scrape the loosened glue.
  • Warning: DO NOT use a sharp knife for popping the iron-on patch; otherwise, you may damage your clothes and end up tearing them.
  • If there is still some glue left, use a good glue remover like Goo-gone and apply it according to the label directions. And you’re done!

4) How to Remove Iron on Patches Using a Hair Dryer

Hairdryers are too handy when heating or blowing up the adhesives to wipe off any material. If nothing works for you, then try the blow-drying patch on iron. It would take some effort, but you will be happy taking off the patch out of your bag.

How to Use:

  • Set the hairdryer on high/hot heat in the first place. You are doing fantastic!
  • After you set your hairdryer, start to blow dry the backside of the iron patch.
  • Blow-dry the patch until it starts to come out. Try peeling it off while you are putting hot heat on it.
  • If the patch does not pop out, try to put some more heat into it. It is time-consuming, but the results are fantastic!
  • Once the patch is removed, use an adhesive remover like Goo-gone to remove the residue.
  • If you fail with this method, don’t get upset! Read more to find some more great ideas of how to remove iron-on patches.
  1. How to Remove Iron on Patches with a White Vinegar Soak

5) How to Remove Iron on Patches with a White Vinegar Soak

White Vinegar is the best traditional way to wash out any stains and loosen glue from the items. To remove iron-on patches from your favorite daily to-wear jackets, jeans or bags, try to do it with a white vinegar solution.

How to Remove Iron on Patches with a White Vinegar Soak

How to Use:

Follow these three simple steps!

  • Make a solution of equal parts of water and White Vinegar.
  • Put your item with an iron-on patch to soak it in the solution overnight.
  • Use a butter knife or spatula gently to pry the patch off. Use adhesive remover to loosen the rest of the glue.

6) How to Remove Iron on Patches with a Warm Water Soak

Did you know water can also remove iron-on patches?

One last method in our list: This is another excellent method to remove an iron-on patch using warm water. This method is tested, and it yields amazing results without even leaving the glue adherent to the clothes. So let’s take on this!

How to Use:

  • In this method, fill your wash basin with enough warm water to soak the item with the iron patch.
  • After the item gets soaked, make sure you put something heavy on the patch so that the patch gets wholly submerged into the water.
  • Drain your cloth and re-fill the sink with warm water when the water cools down.
  • Repeat the process! But this time, keep the item soaked into the water for about 2-3 hours.
  • After a few hours, remove the item with the iron-on patch from water and gently try to remove the patch.
  • Now, slowly and gradually, start to peel off the patch adhere to the item.
  • Once the patch falls out, use Goo-gone or any adhesive removers to loosen the glue.
  • Poke out the remaining glue and let the clothes air-dry afterward.
  • You might be feeling it’s impossible? Make it possible! With these six easy-to-try- methods, you can get the best results. Start with method 01. If it fails, switch to method 02, then 03, and so forth. Do try these methods before you pull your hair out.

7) How to Remove Iron-On Patch Glue from Clothing?

To remove the iron-on patch from clothing, follow these three simple steps:

How to Use:

  • Dip a small cotton ball in an acetone solution or any nail polish (with acetone).
  • Apply the cotton ball with acetone on the iron-on patch firmly and gently press the cotton for about 2-3 minutes.
  • Make sure the cotton has enough acetone to break down the glue. Wipe the leftover glue with any adhesive remover or use a clean cloth with warm water.

8) How to Remove Iron-On Patch Glue from Fabric?

To remove an iron-on patch from fabric, you can go with any of the methods given below; however, there might be some dos and don’ts you must know while moving on for any method.

How to Remove Iron On Patches

How to Use:

  • Remove iron-on patch using freeze method to loosen the remains.
  • Remove the glue using a nail polish remover (with acetone).
  • Heat the item with an iron-on patch with hot heat using an iron or blow dryer.
  • Use the best adhesive removers like Goo-gone.
  • Do it with white Vinegar and remove any residue of the glue.

Essential Glue Removal Tips for Fabric:

Before you begin, always remember to make sure whether the products you will use are fabric-friendly or not? Some products, even some homemade concoctions, might impose a risk of ruining the fabric or can harm your skin as well. It happens in some cases due to specific chemical reactions. So it is essential to use fabric-safe products and without any bleaching elements. Test before you use – a friendly suggestion!

How to Remove an Iron-On Patch from a Shirt?

How to remove iron-on patches from uniforms? Many of you asked whether there are any possibilities to wash iron-on patches from clothing. There are always solutions to problems. In this post, we will give some great tips on how to remove iron-on patches from denim and how to remove a patch from a hoodie. Let’s bounce.

1) APPLY HEAT OVER PATCH:

Applying an iron-on patch is fun to do! Warm adhesives can be used for this process. However, removing the patch becomes problematic somehow. So the first method for removing an iron-on patch is to apply heat. Heat softens the glue and aids for easy patch removal from shirt hoodies, denim, etc.

Simply set the temperature to medium heat and start ironing the patch. Press the iron against the patch properly to melt the glue. Now try to peel off the patch from the fabric. That is it. The whole process will hardly take about 20-30 seconds.

2) USE CHEMICAL SOLVENT

Chemical solvents are best applied to remove custom patches. The glue used by a custom patch manufacturer is hard enough to break down. But before anything, test the solvent before use. It will save your fabric from any damage and stains.

The next step is to turn the denim inside out. And place the chemical solvent at the backside of the denim. Use any applicator, for instance, cotton fabric, towel, or clean napkin, to press gently against the solvent. You can add some more solvent if necessary. As soon as the glue loosens, lift the patch from the edge and peel it off.

How to Remove Iron-On Patches from Jerseys?

Have you been worried about your jersey? Wait for what? You don’t like that iron-on patch on it, and now you must be believing that your jacket is no longer used. Read and stop this post before you throw it. Maybe someone can help you with this.

How To Remove Iron on Patches

 

So how to remove iron-on patches and patch glue from jerseys? Wooah! It might sound complicated but believe me; you can get rid of that ugly iron-on patch in two easy steps. Let’s do this thing!

1) TO REMOVE A PATCH FROM JERSEY

So, this is the first step – how do you remove a patch from a jersey?

  • To remove an iron-on patch, you need a heated iron and wax paper or cloth.
  • Now place the wax paper on the iron patch and press it with the heated iron.
  • Do this process for about 15 seconds. Waiting is over.
  • After 15 seconds, you can remove the iron and try to peel off the patch from your jersey.

2) TO REMOVE PATCH GLUE FROM JERSEY

Now, this is the final step – How do you remove patch glue from jerseys?

  • To do this, you need to break down the patch glue using acetone.
  • Dab the cotton ball into the acetone and place it on the glue.
  • Use your other hand to blot the glue from the cloth.
  • Apply more acetone, if needed.
  • Remember, nail polish removers also have acetone solution. So applying nail polish removers can also do an excellent job for you. Continue using acetone and blotting until the glue is left out.

How to Remove Iron on Patches from Leather?

To remove iron-on patches from leather, you need to have specific tools:

iron patches

 

Tools to Use?

A pair of small scissors: it is preferable to have one with a curved tip so that it will help to remove the patch without even damaging your leather jacket bags or what else.

A small seam ripper: if you are new to this, don’t worry; you can find a good seam ripper from any fabric or craft store.

How to Do?

To make it easier for you:

  • First, locate the patch and turn the leather jacket inside out to see the stitches of the patch.
  • Double-check if you see the right patch and draw an outline on the stitches using white chalk or a marker
  • Alternate Method: It is recommended to always start with unstitching from the backside of the patch. It would be best to be very careful; otherwise, your leather would get torn.
  • Once you have highlighted the stitches on the backside of the patch, now hold the seam ripper and place the U-shape area of it on the mark.
  • Now try to break every stitch one after the other. Be mindful while you are making this step.
  • So snip all the stitches around the patch until everything is leashed.

Remember: If you are doing this for the first time, try to be slow and let the patch makes room to be left out.

Peel off the patch from the front side of your jacket while you snip the tiny stitches. Be vigilant with using the seam ripper. Do not snip it into the leather.

Previous Post
How To Make Patches With Embroidery machine? | Complete Guide
Next Post
How To Sew Patches On Denim Jackets?

Leave a Reply

Your email address will not be published.

Fill out this field
Fill out this field
Please enter a valid email address.

Recent Comments

    Categories

    Recent Posts

    Categories

    Menu